SGLP-RO
ScaleGard
®
LP
Reverse Osmosis System
Spec No. _________________________________________________
Quantity
_________________________________________________
Model Number ____________________________________________
Part Number ______________________________________________
China
CUNO Filtration Shanghai Co. Ltd.
No. 2 Plant East Side
Xin Miao San Road
XinQiao Town SongJiang District
Shanghai, China 201612
Japan
CUNO K.K.
Hodogaya Station Building 6F
1-7, Iwai-Cho, Hodogaya-Ku
Yokohama 240-0023, Japan
Australia
CUNO Pacific Pty Ltd.
140 Sunnyholt Road
Blacktown, N.S.W. 2148
Australia
Brazil
CUNO Latina Ltda
Rua AMF do Brazil - 251
18120 Mairinque-SP, Brazil
Europe
CUNO Limited
21 Woking Business Park
Albert Drive
Woking, Surrey
GU21 5JY, England
Singapore
CUNO Filtration Asia Pte Ltd
2A Tuas Avenue 12
Singapore 639023
CUNO Incorporated
400 Research Parkway
Meriden, CT 06450, USA
Toll Free: 1-888-218-CUNO
Worldwide: 203-237-5541
Fax: 203-238-8701
www.cunofoodservice.com www.cuno.com
Limited 2 Year Warranty
CUNO Incorporated warrants to the original purchaser-consumer that this product is free from defects in materials and workmanship. This warranty, together with any and all warranties implied
by law, shall be limited to a period of two (2) years from the date of original purchase by the consumer. This warranty does not apply to failures that result from abuse, misuse, alteration or
damage not caused by CUNO. This warranty is subject to exclusions and limitations. Please refer to the Warranty Card provided with the product for details.
© 2005 CUNO Incorporated
LITFS275 0305
Physical Specifications:
Do not use with water that is microbiologically unsafe
or of unknown quality without adequate disinfection
before or after the system.
CUNO Incorporated recommends regularly scheduled
maintenance and replacement of the filter cartridge(s) in
order for the product to perform as advertised/sold. Call
for information.
Replacement Cartridges
Part Number Type Qty. Required
55706-10 5 Micron Prefilter Cartridge 1
55987-20 Reverse Osmosis Membrane 1
System to incorporate reverse osmosis technology.
System to incorporate non-electric pump
System to contain integrated prefiltration for the
reduction of sediment and chlorine taste and odor.
RO membrane to be a thin film composite (TFC) type.
System to be manufactured from FDA CFR-21 compliant
materials.
System to be wall mountable with a stainless steel
bracket design.
System inlet plumbing connections to be 1/4” quick
disconnect type.
System drain plumbing connections to be 1/4” quick
disconnect type.
System outlet plumbing connections to be 3/8” quick
disconnect type.
System to incorporate an integrated 2 gallon (7.6 liter)
water storage tank.
System to produce 75 gallons (284 liters at 77°F (25°C)
per 24 hour period.
System to have a minimum incoming water pressure of 50
psi (345 kPa) and a maximum of 100 psi (689 kPa) ±15%.
System to have a minimum incoming water temperature
of 40° F (4.4° C) and a maximum of 100° F (37.8° C).
Installation Tips:
Shut off downstream equipment prior to installation of
the system.
Do not exceed operating parameters for temperature or
pressure.
Do not install outdoors.
For cold water use only.
For commercial use only.
System incoming water pressure must be between 50
and 100 psig ±15% or external pump is required.
12 3/16"
(31 cm)
17 3/4"
(45 cm)
9 5/16"
(23.7 cm)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals